MG America A partnership for success

MG Compact Capsule Filler

 

 

MG Compact Capsule Filler

Technical data

Mechanical principle:
continuous rotary movements

Total installed electrical power (basic machine):
10 kW.

Compressed air requirements (appropriately filtered):
Minimum pressure: 6 bar
Flow rate: 300 dm3/min.

Standard voltage:
400 V (+/-10%) – 50 Hz –
three-phase or
460 V (+/-10%) – 60 Hz –
three-phase

Speed
Up to: 6.000
12.000
24.000
48.000 capsules/hour

Products
powder
pellets
microtablets
tablets
low dosages of powder to be inhaled
herbs
capsule into capsule

Dosing
powder + tablet
two different kinds of pellets
two kinds of tablets
pellets + tablet
microtablets + tablet
two different kinds of pellets + tablet
other combinations: contact us

 

Capsule filler

Output: 6.000, 12.000, 24.000, 48.000, capsules/hour; it is possible to increase machine output by simply adding some elements to the machine main units.

Can handle all capsule sizes from 000 to 5, including tamper-proof capsules.

MG COMPACT can dose: powders, pellets, tablets, microtablets, herbs.

Up to two dosing units can be fitted to the machine at the same time.

Equipped with a control panel with type coloured graphic "touch-screen" display .

On request, it can be equipped with an industrial PC with colour monitor with Windows NT and an operator-friendly interface to control machine functions.

On request, MG COMPACT can be equipped with the Mod. SWC weight inspector for filled capsules.

The full validation package is available on request: FS / DS / IQ / OQ.